Optimist Pram taking real shape

For quite some time weve just imagined the Optimist sitting on the strongback, but now the outline of the dinghies has been reveled. Ric Altfather, president of the Cleveland Amateur Boatbuilders and Boating Society, offered us some good advice when assembling our Optimists. The bend we had to make to instal the chine is a bit too severe for most 3/4 x 1 1/2 inch kiln dried lumber. Ric recommended we soak them prior to trying to bend them in place. We let them float on the pool cover for a few hours - this seemed to work well. They would have snapped like a twig if they had not been soaked.

We are now contemplating the next step. We need to fare all the edges with a hand plane and sander to prepare for the eventual plywood skin that will make these real boats.

Part 4:



The three frames looking really nice in the garage.

To take the twist out of the chine at the center bulkhead we clamped a board to the stringer and then screwed the bottom of the board to the frame leg. We let the wood dry and take the shape for a couple days before putting the screws through the chine. Im not sure it is necessary to wait that long, but we had the time to let it dry and didnt rush it.

To mark the spot in the bow to let-in the chine, we used the paper pattern that was supplied with the CABBS plans. With the chine stringer well soaked I was able to spring it into position to check my pencil line. I made some slight changes to the template line to adjust for a better fit after cutting the notch.

 

I found that it was pretty easy to put a pilot hole in the frame leg to make the final cut for the gunwale stringer. I drilled the hole to match the angle that the stringer would be let-in. I cut from the front and then moved to the back to check that the line was being followed on both sides. I would cut a little bit and then check about three or four times to be sure I wasnt straying from the lines on both sides.

Here I am checking to see if the bow is perfectly parallel to the center frame by laying a board on the bow and sighting across. There was a very slight twist that I was able to remove by weighing down the corner of the strongback with some stones (see bottom left) and shimming one of the back legs.

Read More..

MacGregor 26

When the MacGregor 26 came out in, I think the 1980s, I and other sailing purists were horrified. The MacGregor 26, the sailboat that was a motorboat, or vice-versa, had the effrontery to strap a big outboard on the back and become a very quick motorboat, one that could easily pull a water-skier. My thought at the time, "why not just go out and buy a nice little outboard skiff rather than this sailing/motor bastardization?" Im sure, this was the same thought many other sailors shared. It seemed the the #1 marketing point of the Mac 26 was its motorized performance as shown in this video (this is not what a sailboat is about! What about the ambience, the wind and the waves?).



I recently had a conversation with Jim, a retired boat dealer, 35 years in the industry, and he couldnt say enough good things about the MacGregor 26, enough praise to make me feel that my first knee-jerk reaction may have been unwarranted. Eleven thousand of the 26s were built, seven thousand in the U.S and four thousand distributed world wide. Those numbers alone make the MacGregor 26 one of the most successful small cruising sailboats ever built. Jim told me this real life story of one of his customers to demonstrate the capabilities of the MacGregor 26.

---

Two fathers with their sons trailer launched their MacGregor 26 out of West River one Friday night and motored the mile or so over to Rhode River to spend the night off of one of the small islands. Saturday morning, early, they blasted over the flat calm waters of Chesapeake Bay to where the fish were biting. They fished all morning, grabbed a lunch in the spacious cabin, and, with the breeze up, filled the ballast tanks for a pleasant sail back to the take out ramp at West River.

---

Jim, who sold and also owned the 26, ticked off several selling points of the MacGregor 26:

• A great family boat because the kids got to do the things they enjoyed; water skiing, tubing and not so much the things they found boring, such as drifting in light air. Plus you could get to the anchorages quick enough to enjoy swimming and hanging out with other kids.
• A very roomy interior. With the MacGregor 26, designer Roger MacGregor anticipated the latest "French" styling of Beneteau and Jenneau with the high freeboard and swoopy coach-roof, all in the name of interior space.
• Decent sailing performance. Jim is an accomplished sailor and took the MacGregor 26 over to the Bahamas and did a circumnavigation of the Outer Banks.
• Trailerable, so you could get to a place to sail to the Bahamas or the Outer Banks. Or you could just pull in to a beach.

I must admit, Ive never been on a MacGregor 26 (overall though, I havent been on many different cruising sailboats so that isnt much of a surprise). After my conversation with Jim, I will give Roger MacGregor credit. It appears he was a design genius to successfully combine all these capabilities in one boat (my sailing snobbishness aside).

Here is  a drawing of the MacGregor 26M, which I think was the last model of the 26 (the 26X was the first). Thanks to bluefreeyachts.com.au where I got the image.

Plenty of MacGregor 26 cruising videos up on YouTube. Here is one of them.

Read More..