Tampilkan postingan dengan label windows. Tampilkan semua postingan
Tampilkan postingan dengan label windows. Tampilkan semua postingan

Selasa, 29 Maret 2016

Sailing Alone Around The World

No, not me! Definitely not on the bucket list! We are content to have sailed between Eastport, Maine and Grenada, West Indies -- only about 6,000 miles, round trip, less than a fourth of the distance of the equator and one must also put in a lot of northing and southing to circumnavigate. Europe still glimmers in my mind but is improbable. There are many ports in the areas we have sailed that we have not entered.  And the "alone" part has no appeal to me either. I believe that I could handle the boat but Im far too social an animal. Without Ilene it would be no fun. And in certain longitudes one encounters pirates. No thanks.

No, the sailor in question is Captain Joshua Slocum.  A New England Yankee retired merchant sea captain:  both square riggers and steamships. Slocum set off for his 38 month adventure when he was in his fifties during 1895-98. His was the first such long cruise for pleasure.

I read his account, a classic, at the suggestion of my friend Jim. It is quite interesting and well written with footnotes explaining some of his few archaic sailing terms and references to the personalities and current events of the day (meeting Stanley of Stanley and Livingston in South Africa; avoiding mines when entering Newport RI during the Spanish American War). He also included 65 illustrations (no photos) among the books 265 pages. These include his boats sail plan, lines, and other views and views of some of the more exciting incidents. His writing is better than mine but shares a common characteristic: an unemotional recounting of the facts which speak for themselves; he does not need to characterize them. He was opposed to witchcraft and I believe organized religion, and liberal in his political outlook except as to race and colonialism, in which he was of his times. He includes in the narrative as to each stop along the way, his dates of arrival and departure; from this someone could calculate the number of stops and the percentage of sailing days as compared to lay days, as I do in this blog at the end of each of ILENEs long cruises.

"Spray" his wooden gaff rigged sloop (reconfigured as a yawl half way round), was only 37 feet long on deck, compared to ILENEs 42 feet (but with a long bowsprit and aft extension for the sheet of the jigger, Spray was quite a bit longer than ILENEs 45 feet overall). She was 14 feet wide compared to ILENEs 12, with less draft, concrete ballast instead of lead and double the weight. And he had rebuilt her himself using hand tools on the hulk of an old fishing boat. And Spray had no engine or fuel tanks, no refrigeration, no GPS, no EPIRB, no chart plotter and no radio -- he was rather alone out there, taking pleasure in frequently referring to himself as "the crew of the Spray."

My interest in this book was enhanced when I toured a modern-day, fiberglass, larger-scaled replica of Spray at the dock of Marina Cay in Tortola in November of 2010, before Ilene and the kitties joined me there for our trip down to Grenada. The replica had modern amenities and was home to a family with several small children.

Slocum was a self educated man about writing as well as about the sea. I could not help but compare his chapters to posts of this blog. Of course my own adventures and accomplishments pale by comparison to his, qualitatively as well as quantitatively, but both of us are sailors who write. Generally, when I read, I find the stories interesting substantially to the extent that I can identify with and compare myself to the characters. There are a lot of things in this book to which I could identify.  He wrote comparing himself to the early explorers, who did not have accurate clocks or charts and found himself wanting; and I am not a fraction of the sailor he was.

Yet there are many episodes that resonated for me. He wrote that following a big storm he took out his palm and sewed a new sail to replace the torn one, calling it "serviceable if not beautiful". I recalled my adventure aboard On Eagles Wings this past winter during which I used such a palm to repair a sail.

He was given a set of books by the widow of Robert Louis Stevenson during a visit to her island in the South Pacific off South America. This put me in mind of the generosity to me of Eve, the widow of Selwyn, a great sailor of our club and a great mentor to me.

Nearing home Slocum encountered the USS Oregon, which I learned about in the Oregon History Museum. She signaled "CBT" -- i.e., "Are there any men of war about?", referring to Spanish warships, to which Slocum flew the negative flag.

An interesting unresolved question that this book raised involves usage. When I hail another ship, my usage, which I believe is the common one today, is "Ahoy [name of vessel]". The "Ahoy" serves to capture the attention of the listener to listen for the name of his or her boat. Slocum, if he greeted us would reverse this: "ILENE Ahoy!" There is a lot of "ahoying" in the book and it struck me as wrong each time. I wonder when and why the custom changed.

He described an incident in which he mistook the light of a lighthouse flashing on wave crests as a reef, way to close, and the scare it gave him, This reminded me a moment of horror of my own off the Maine coast one dark and stormy night in 1992 -- the moon peaked out from behind the clouds, low, near the water and I thought it was a strong light on a large ship crossing our bow.

Slocums description of the joy of a landfall at the end of a long voyage will resonate with every cruiser and his description of ports in my home waters --from New York to Maine -- were very rewarding.

He did not keep cats like ILENE and humorously described a short passage with a goat which had been given to him as a gift. He used rope instead of chain to tie the goat to the mast and after eating through the rope the goat ate Slocums hat and his chart of the Caribbean

He had a few groundings and was hit by another boat while at anchor; all things that have happened to me and are going to happen to you if you are out there enough.

He tried to tow a much larger boat that had grounded but the captain refused his offer and the ship was later lost. On my first boat, "Just Cause;" I went out from the safety of Three Mile Harbor (the back door of Easthampton, Long Island) to tow in a much larger sailboat, and during another Club cruise was the beneficiary of a tow from a power boat when both my engine and the wind failed (Thanks again, Stu).

News of Slocums voyage had spread and he was greeted as a celebrity in most ports, large and small, and fees were waived while he was feted by the local dignitaries. This has not been my experience.

He also traded in merchandise that he picked up along the way in Port A for sale in Port B; you couldnt take the merchantman out of him. And later in the voyage he was given the use of lecture halls to earn money by telling his sea stories.

The most exciting portion of the trip was his circumnavigation of the western half of Tierra del Fuego, which lies between the Strait of Magellan and Cape Horn. This was also where he encountered natives who were pirates. He had not intended to circumnavigate these islands, but upon exiting the Strait into the Pacific,   he was hit by a storm that simply blew him back south and east of the Horn. The book contains several charts of his path, and a separate one for the tip of South America where all of this action occurred.

Having transited a good part of the Pacific from an island 340 miles west of Chile in 43 days, he passed just south of the Marquesas without stopping there and continued for another 29 days nonstop to Samoa -- 72 days at sea. He read a lot underway and reported on what he read.

He also had many pertinent observations on the winds tides, currents mileage made good, sun sites, and such matters as crossing the Equator and crossing his own track.

One amazing feature of his boat and his own skills was that he could trim his sails so well that he could lash his wheel in place and let the boat steer itself for days at a time. Only once, in a storm, did he tend the wheel by hand for 30 hours. Many people doubted the veracity of this self steering assertion and he repeats it several times with an illustration of how he lashed the wheel but with the caveat that he could not vouch that boats with large overhangs, fore and aft, could perform this way.

This will be the last nautical book review in this blog -- for 2014. I plan to help a friend bring his boat from Essex CT to Annapolis at mid month.
Read More..

Sabtu, 26 Maret 2016

April 21 22 Charleston SC to Wrightsville Beach NC 155 7 Miles

We left at 10 as planned, but I screwed up reading the tide table so the tide was against us on the way out of Charleston, though weakly. We put up the main in the inner harbor and jibed it several times on the way out, past Fort Sumter where our Civil War began. Actually it began in SC, earlier, with the thinking of Calhoun, on the theory of states rights to "nullify" federal authority, a doctrine now becoming popular again among the lunatic right in this country.
We turned left as soon as we reached the first buoy after the end of the seawall and put up the genoa as well. This was before noon but the wind was too weak and too far behind us, to move the boat with  any speed, so we motor sailed, mostly motored, until about 1:30. I even had taken down the mainsail. I had not realized how much of the first 109 mile long part of this passage, was more easterly than northerly and so the projected five to ten knots of west wind was behind us. Then came wind, much stronger than projected and a gift to us. I was able to get up half the mainsail, with double reef in it, and continued with the genoa. The wind built behind us and we were screaming along at seven to eight knots with peaks at 8.9. And with the wind about 120 to 150 degrees from our bow, we rolled a lot from side to side, most unpleasant. Lene felt a bit nauseous though she did not lose her food. We had a delicious cold dinner -- no cooking with the rolling. It was warm and sunny by day and reasonably warm at night, with no rain. But during the night we got some slow speeds, less than four knots and even though I did not put up the genoa again until near daybreak, it was this night part, as well as the first few hours, where we lost time
After dinner, at 7:30, we replaced the genoa with the small jib, a safety measure for nightime sailing in big waves, and were still making over seven knots with just the small headsail and double reefed main. We had put on the preventer to prevent accidental jibe of the mainsail, and with the small jib sliding back and forth we took it in and sailed under just double reefed main. The preventer was a good thing because the wind had shifted from off our starboard quarter, to off the port quarter during Lenes watch. We were sailing "by the lee" -- the way you get that accidental jibe. When I got up at one (Lene let me sleep late) we jibed the main and continued on toward the turning point - off the tip of Frying Pan Shoals, which extend many miles out into the Atlantic from the Cape Fear River. We saw very little traffic: Two big freighters passed us at quite respectable distances -- closest point of approach being miles away -- and one sailboat overtook us, headed for Beaufort. I saw his lights and estimate he was 200 yards off our starboard side, moving a fraction of a knot faster than ILENE. Prior to the close passage I had a radio conversation with him to confirm what each of us was going to do.
Once around Frying Pan, at about 4 to 5 am, we turned north to Wrightsville (The Masonboro Inlet) and the wind came up from our port quarter to its beam and even forward of that. This second leg was only 32 miles and wind speed varied considerably during the leg, as, consequently, did boat speed.
It is hard to get good pictures of a night passage so at least I have the long awaited dawn.

Masonboro Inlet is easy, wide, well marked and flanked with seawalls. Once in, it is easy to get to the anchorage area and we dropped at 1:30, only 90 minutes "late" compared to our projected schedule that would have averaged 6.5 knots. Nice homes line the bay side of the barrier island.
We put out a lot of chain because there is lots of room and 20 knots were predicted for this evening. But by 4 pm it was howling at up to 40. We visited Wrightsville and made the reciprocal of this same ocean passage, to Charleston on our way south last fall and hence felt no need to lower and raise the dink to stretch our legs in Wrightsville. Tomorrow: Beaufort NC, about 80 miles and if the forecast comes true, a beam reach  or close reach from the port side, with five to fifteen knots.
I  tried to take a photo of the pod of dolphins playing under and around our bow, taking the Ipad up there, but they are way faster than ILENE at eight knots. I took maybe 50 shots and only one, a video of less than one second, caught a dolphin. These were not the slow graceful swimmers in the ICW but racers amidst the big ocean waves. I couldnt get the video into this post but it is on Facebook. I did manage to neither fall off the boat nor drop the camera.
Ilene is a true member of this crew and a solid citizen on overnight passages. She grumbles a bit and still relies on me, and I have to admit I like the  second part of that. She is even taking an interest in the charts, tides and weather. I couldnt make this trip without her, physically, mentally or emotionally. We have some chores that each of us do most of, but both of us do many of the chores. She said she liked our 25.5 hours together.
On our honeymoon on the old ILENE, in August 2002, we spent a pretty terrible 36 hours in a noreaster off the coast of Maine  The boat got beat up (torn sail, water inside through the dorades, compass light out) and we got beat up too. After a good nights sleep Lene asked, "Where do we go next?"  I replied "God, I married the right woman!"  And that has become truer with each passing year.
Read More..

Blue boat maiden NQD 300 Watt motor


Some Arduino code for Yellow Boat 4 twin NQD jets










Yellow Boat 4
Read More..

Jumat, 25 Maret 2016

January 19 Coconut Grove to Pumpkin Key 24 8 Miles

We had first feline drama last night: It was dark. I opened the cafe doors of the companionway to let the cats in but Alfie didnt come. So flashlight in hand I walked around the deck, opened the stack pack (a favorite Alfie hiding place by day) and checked atop the canvas, under the helm seat and in the dink. No Alfie. But then we heard the first of her cries and they were from behind the boat. So I swept the water with our strong flashlight, but no Alfie. Time for the 2,000,000 candle power floodlight, but we had trouble hooking it up to the cigarette lighter socket and stretching out the cord. Time to lower the dink and search for Alfie in the water behind the boat (where the current would be taking her. But her cry was not the powerful piercing "Im in trouble" scream, but rather her petulant mewl. Lowering the dink takes me five minutes -- Ive timed myself -- perhaps longer in the dark. Lene has now started whimpering and I asked her to please stop because such is not useful.
Before actually completing the lowering we found her. With the possible fuel flow problem that morning, I had advised Lene to take the hand held VHF radio that morning: "Just in case -- so you can call for help if you need it". It was in the little compartment in the bow of the dink created by an aft opening hinged padded seat there. I had forgotten to take it out when hauling the dink up that evening and the lifting lines run across the opening edge of the seat, making it hard to lift the seat once the dink is raised.
But I had gotten the seat up enough to reach in with my hand and retrieve the radio, for use the next day. And the seat was left raised -- just enough for Alfie to squeeze herself in. But with lower footing on the inside of the cabinet, she was not strong enough to get herself out, without help. She craves small spaces. What a relief!

Today we were underway for about five hours and I looked forward to a good sail because except for two dredged and charted channels, one a quarter mile long and the other a mile or so, the water was open. Shallow at 8 to 11 feet, but open. But though I put up sails as soon as we cleared the Dinner Key Channel, the wind did not cooperate, until the last half hour, a time when one is always eager to get the passage done. The wind was from behind us and too light to move the boat at a reasonable speed.

Pumpkin Key is a roundish lump of an island on the ICW side of the Keys, just off the northeast end of Key Largo. No services or shore activities, just a hangout place for boaters on the go.
 There are about ten boats here, mostly power, with plenty of swinging room. The water is ten feet deep all around, and we have 60 feet of snubbed chain out and do not expect heavy wind tonight. All of the boats are on the south side (lee side) of the island; the other side becomes the anchorage if the winds come from the South.
The Keys are stretched out in a mostly east-west direction with just a bit of southing as you head west for Key West. There are two routes to Key West from Miami: one way is the ICW route which is north of the Keys, in the Gulf of Mexico. It has many marinas but is quite shallow, too shallow for us after this point. The alternative is called the Hawk Channel which runs south of the Keys in the Caribbean/Atlantic. It is called a channel because there is an off shore underwater coral reef running parallel to the Keys. Hawk Channel is deep enough and wide, ideal for sailing, if the wind cooperates, but has few marinas or anchorages along the way. From here we expect and hope to be mostly separated from the wake-making power boats which prefer the ICW route.
There are several passages by which one can switch between ICW and Hawk. Our plan for tomorrow, subject to weather, is to go through Angelfish Creek and the Hawk Channel to Rodriquez Key, off the other end of Key Largo  -- before reaching Marathon, which is a rest station for cruisers, the next day. The only potential problem is that some books and folks say that Angelfish Creek is too shallow for ILENEs 5 8" draft. Others say we can make it if we go shortly before the high tide, which is scheduled for 8:10 a.m. tomorrow. And the entrance to the Creek is only about a mile away -- I already have it loaded in as our next waypoint. So we plan to leave at daybreak. And we will check in and let you know how it went, in our next post -- either from Rodriguez or Marathon.
Read More..

Kamis, 24 Maret 2016

January 26 29 Four More Lay Days in Marathon Zero Miles

Here is a view, looking east toward the mooring field in Marathon from ILENE.
LOTS of masts. and more beyond them. A few of the boaters are at the marinas dock, a seawall.
And the marinas inner dinghy dock with lots of room. They have as much room again at the outer dinghy docks to the right at the rear end of the photo.  And they have "project rooms" where you can sew sails, varnish your oars, etc.



We had a very pleasant day with Bev, who was introduced to us by my friend, Hugh. She picked us up in her truck and drove us back to her beautiful home on Duck Key, about twelve nautical miles back east from here. Bev served us a lunch, let us do laundry and take showers, took me to Home Depot and Lene to Publix and then we had happy hour and dinner with her at the Sunset Grill, at the western end of Marathon, with great sunsets, before driving us back to our dink. It was a very full afternoon, on a day when the wind had moderated somewhat so we were not afraid to leave ILENE unattended. Bev lost her husband, suddenly, less than two years ago. They were boaters so she knows how to treat cruisers. She has five lovely grandkids in MA and in MO, where she will be moving back to soon. Bev is a pretty woman but sadly declined the offer to appear in this blog. Duck Key is an upscale residential community on an island south of Route 1, with mostly waterfront homes on the canals that run through the island. Shopping is a ten mile drive to Marathon. Sadly, we may never see you again Bev, but if you ever come to NYC and we are home, there is a berth for you.


These manatees come to the dock where there is a fresh water hose. But we are not supposed to feed them water because it encourages them to come in too close where they get hurt by propeller blades. You can see a white scar on mommas back (upper left). She is ten feet long! They are vegetarians and will not intentionally harm a human. Sort of a weird cross between a walrus head, a whales body and a beavers tail.

While at Home Depot, with a lot of help from a very knowledegable staffer, I bought all of the parts (except nuts, bolts, washers and sealant -- which I had) to install the aft, 360 degree white running light atop a length of PVC pipe.
The problem was that the base of the light had only a threaded hole for a six mm bolt. I needed to create a stub to stick into the PVC. About two hours of work the next morning in the wind sheltered inner dinghy dock area, and it is done. Until now we had to hold the white light on the top of one of our heads, which gets tiring on the arms after a while. And while I was at it, after looking at MANY other dinks at the dock, I tied a thin short line around the base of the dinks red and green bow light, with the other end secured in the boat. So when, the section cup fails, as it will, the $35 light will fall into the boat rather than into the sea.

Then we met Alex, proprietor of SeaTek. He had come recommended by John and Marcia of s/v Remora. A very pleasant and efficient young man with a beard who lives aboard his boat, anchored here. He advised us to visit Marquesas Key on our way to the Tortugas, and stay in an unmarked place where the water is deep enough. He is also an intelligent and inexpensive marine electrician. He came to our boat, fixed a lot of things electrical and ordered the "combiner" we need to solve our battery charging problem which he will install when we stop here on our way north. I had caused one problem when I installed the batteries: I crossed two black cables causing the Link interface to confuse the two batteries. Another problem was a fuse that took ten seconds to replace. He pointed out a poor crimp which I fixed after he left. I took the aft part of the boat apart before he got here to save time and was very pleased with how much he got accomplished in one $70 hour.

An afternoon of shuffleboard followed by Lene watching her TV shows on the Marinas wifi while I visited the Marathon YC, where, as Harlem members we are welcome to dine. They have 300 members, mostly power boats, and only 20 slips -- no moorings. Most of the members keep their boats at back yard docks in the canals. A rather unforgettable, except for presentation, dinner at Marathon Steak and Lobster rounded out our visit here.

Read More..

Rabu, 23 Maret 2016

Optimist Building in Virginia Beach

Al from Virginia Beach writes in and shares pictures of his project boat...

NOTE: ALS UPDATES CAN BE FOUND AT THE TOP UNDER PAGE TITLED "Virginia Beach Optimist Project"

Im building the boat for 3 and soon to be 4 grandkids. I sail and my 2 sons sail, so getting the little ones into it makes sense. The oldest is 8 but lives about 300 miles away, so when next summer comes and we get to our lake house hopefully the craft will be ready to use.

Im using West System to coat and put this together but am not glassing the boat - extra weight that I dont want or need. My boat is Maranti plywood, 12mm for the transom etc and 6mm for bottom and sides. Ill make my own foils from 12mm also.  For the "solid" wood I have found some very nice and cheap spruce. I plan to use some mahogany for the rub rails - I have some nice pieces. Almost at the point of fastening things together since today I got the chine bent and straightened - that was fun and am glad I had as many clamps as I have, but one never has enough clamps!

Steps:

I fished a piece of spruce out of my pond and tried again with bending a chine.  I figure that 24 hrs underwater with all the enzymes and slop in my lily pond should make it pretty bendable.

I clamped the stern and mid ship positions and placed the above type clamps to make it parallel.  Then I gently bent the end of the chine toward the forward bulkhead and did two things. First I used a long clamp around the chine and the nearer stringer. Then I hung my tool bag with saws, drills and assorted heavy items on the end of the chine. I never changed the weight but I applied the straightening clamps and gradually tightened the long clamp.



The whole process took no more than 45 minutes and I never heard a creak from the wood.  When the chine was finally in position I removed the long clamp and tool bag and attached the chine to the forward bulkhead with a clamp. Not a screw in it yet. I will let it dry for a few days before removing clamps and attaching with screws. Then Ill see how the skin fits.



Read More..

Selasa, 22 Maret 2016

Directors Cut CRAB Delivery Skipper Freedom 21


Click here for information about CRAB (Chesapeake Region Accessible Boating).

It somewhat pains me to admit this, but Ive done more keelboat sailing over this past summer than dinghy sailing. Ive been volunteering at CRAB (Chesapeake Regional Accessible Boating - my long time sailing friend, Dick White, is sailing director there) and Ive been kicking around the Bay with various groups in CRABs keelboats, the Freedom 21s, which were designed specifically for handicap sailing.

The blogmeister had to make a singlehanded delivery of a Freedom 21 from the home-port of Sandy Point State Park down to Annapolis (the Freedom 21s were sailing in Boatyard Bar and Grill fundraising regatta off Annapolis that Saturday). I took my trusty pocket waterproof camera and shot a very short video of the 6-7 mile jaunt (including selfie).





I was delivering the Freedom 21 down to Annapolis for the annual Boatyard Bar and Grill fundraising regatta, where, as it turns out, US Sailing had decided to feature this years regatta, and CRAB, in this well done video.




The local Chesapeake Bay sailing rag, Spinsheet Magazine, captured the elusive blogmeister crewing at a previous Wounded Warriors Regatta.


Photo courtesy of Spinsheet Magazine


Read More..

Senin, 21 Maret 2016

On Eagles Wings Again

Last year at this time I reported on a one week cruise with Bennett and our two wives aboard his 40 ketch, On Eagles Wings, in the Virgin Islands. Well a whole year has rolled around but this time the wives were not with us.  The rest of our complement, was Allie and Nick, married friends of Bennett with skills: He is a professional bartender and she a professional chef, and their friend Alex, terrifically inventive and handy, was the fifth person. These fellow crew members are in their 20s and strong, willing, fast learners and good workers.
Allie, Nick, Alex and Bennett--the first. morning
We had one lay day at Anegada, but otherwise made multiple stops, twelve in six days. (1) Marina Key for fuel. (2) The Baths for swimming and rock scrambling on the beach (you have to swim in or take a cab - no dinks allowed on the beach anymore) The next three photos show the beach we swam to at the north, rocks we scrambled under and the beach at the southern end of the scramble








(3) Spanishtown for groceries and lunch,
Roger, Nick, Bennett and Allie
where Allie was disappointed in her search for fresh fish but did persuade some big dudes with a cooler to give up one of their lobsters, for free --
our desert after the steaks;
Allie is a happy camper, but the lobster is not.
(4) the anchorage on the Southwest side of Prickly Pear Island, a new spot for me, in North Sound, Virgin Gorda, where we had lots of room between our only two neighbors -- a Dutch boat behind us and a French one in front of us.










(5) The anchorage off the beach, west of Pomato Point on the south west coast of Anegada. It is west of the harbor where I had always gone before and open without a marked channel. Here we rented small motor scooters -- top speed 35 mph.
 We visited an unnamed beach on the north side near Lob Lolly where Lene and I had gone, and next day to Cow Wreck Beach, way to the west, a new favorite. We also had a bonfire on the beach near our boat, and finally did score some almost fresh (locally recently frozen) mahi mahi.


(6) Great Harbor on Jost van Dyke for fuel and water and for a five minute tour of Foxys. (7) Diamond Key at the far eastern end of Jost, as my third new place: we dined at Foxys Tabou, a less raucus outpost of the Foxy empire and took a small hike to The Bubble Bath,
Alex and Allie
where breakers send lots of foam into a small pool formed by boulders in a gap in the cliffy face of the island (Picture to be added). (8) White Bay, also on Jost, where we patronized both the very crowded Soggy Dollar Bar and the quieter Ivans No-Stress Bar, whose tender, Cas, let Nick mix our drinks. Then, after eleven tacks from Jost (via the passage between Great Thatch Key and St. Johns) we came to (9) The Bight in Norman Island where we took our first night-mooring since our starting point in Trellis Bay and dined at the lovely, newly constructed (after the fire) restaurant there.

Alex, Roger, Bennett, Allie and Nick

Next day began with snorkeling, first at the two most popular spots in the BVIs: (10)The Caves and then, nearby (11)  The Indians. 
Our final long reaching passage brought us to (12) Village Key Marina, in Roadtown, Tortola, which is On Eagles Wings home port and from which we departed by ferry the next morning after showers, and sushi at Origins, across from the ferry dock, which was quite good.
     Bennett drove through the passage between Virgin Gorda and Mosquito Island, with a bit of six foot charted depth, which I have never done, and with ILENEs 5 8" draft, I will be unlikely to do. OEWs draft is only 49". But this was a nervous moment though it cut an hour off the trip outside Mosquito Island.
    I did a few boat improvement projects. The first was the repair of the mizzen sail, the smallest and least significant of the three sails of the ketch. It had a tear, about a foot long, parallel and near the seam at the leash (rear side) near the top. Without repair, the tear would have grown larger and larger, especially when sailing close to the wind in strong air. Sail tape alone had been tried and did not hold. I sewed back and forth through the sail tape on both sides ( to hold the two pieces next to each other and the sail itself. For this task I brought my sailors palm, (a leather strap around your hand with the business end of a thimble mounted in the palm. It is needed to apply the brute strength to force the needle through so many plies of tough material. The result does not look pretty (Frankensteins head?)

and the boats owners may elect to have the repair redone professionally with a sewing machine and laying flat rather than standing on the rocking deck and working face high through material that is hanging vertically, but it will hold.  I also placed almost 100 whippings at both ends of the many lines that OEW has. It is true that many of the ends were holding together fairly well through the fusion in high heat of the plastic fibers of which the cores of the lines are made, but whipping adds a smart nautical look and is one of the few skills that I have, so I like to use it.
     A word about our food: OEWs galley stove is an electric range, powered by her electric generator. The generator had gone bad and the owners were contemplating replacing this system with a propane stove. I suggested a much more simple solution, given the infrequency that meals are cooked aboard, consistent with the classic nature of the boat -- a modern low pressure two burner alcohol stove. In the meantime, we made coffee using the electric percolator,
Alex and Bennett making coffee
which the main engine could power.



Allie cooked  our eggs, french toast, toast, fish, veggies and steaks on the small barbecue mounted on the stern, powered by small canisters of propane used by campers. Cooking in that condition in the dark was quite a challenge to which Allie rose. Her stove in daylight:

Read More..

Happy New Year!

Happy New Year Fellow Boaters!

Some of us have put our boats away for winter while some in the south and in the islands enjoy boating year around. Whether you are using your boat or have winterized it, it is a good time to come up with a to do list for your boat for the upcoming season. Some examples of things to add to your list:
  • Is your safety gear up to date and does it meet federal and your state requirements? Here is a link for the USCG requirements: http://www.uscgboating.org/assets/1/workflow_staging/Publications/420.PDF
  • All boats with living space should have smoke alarms and carbon monoxide alarms, do you? If so, then this is a good time to change batteries if you have not done so.
  • Do you have an EPIRB? If so is the registration and battery in date?
  • Remove your hand held fire extinguishers and turn upside down and hit the bottom with your hand, can you hear the dry powder settle? If not your fire extinguisher might be compacted and need replacement. If any doubts you can have inspected professionally. When was the last time the fire extinguisher in the engine room last inspected?
  • Check you thru-hull vales, are the handles easy to turn, how do they look, corrosion, when was the last time they were serviced? 
  • Check all of the hoses and hose clamps, replace if needed.
  • Inspect your fuel lines and condition of your fuel system. Does your fuel system meet USCG requirements?
  • If you have lead acid batteries, check the electrolyte, are you batteries secure? Are the wire terminals tight?
  • If you have an inboard engine, how is the condition of your stuffing box, cutlass bearing? Is your engine aligned properly.
  • How is the condition of your lifelines? I often find lifelines that need replacement because of corrosion and cracks in the swage fittings.
  • If you own a sailboat, when was the last time the rigging inspected? 
  • On sailboats chain plates are often neglected. Inspect for water intrusion, pitting and cracks. I have found Thermal Imaging to be useful in finding signs of trapped moisture in chain plates embedded in fiberglass.
  • If laying your sailboat up for the season, this is a good time to remove your sails and have them inspected at a sail loft. Also it is a good time to order a new sail, some lofts offer discounts over the winter.
  • Make a list of improvements you want for your boat and get estimates and see if any yards are offering discounts for work completed over the winter.
  • For us with metal boats this is a good time to inspect our bilges, sail lockers, lazarettes, and engine rooms for corrosion. Insure these areas are clean. 
I am sure I could keep going, but you get the idea. I am wishing everyone a safe and enjoyable 2014!
Happy Boating!
Read More..

If It Is Monday This Must Be Helsinki

We took the shuttle bus in to town and explored with the map as our guide. A large modern Lutheran Church was built into a hole excavated from an outcropping of rock atop a hill.








A beautiful piano sonata was being performed; too bad not the organ. Oops, no cameras; I didnt see the sign.
The grand esplanade, one end of which abuts the market at the head of the inner harbor.








 There we saw this beautiful schooner with an old fashioned anchor on each bow, each weighing almost 900 pounds.


Shopping became the rage with Lene scoring a fur hat, suitable for Nanook of the North; except we will be south next winter so the chinchilla pelts will have to wait. We also got a bar of Salmiakki, a local delicacy: think chocolate covered licorice. The sweetness of the milk chocolate mixes with the salty/sourness of the liquid center. Dont laugh. Salted caramel is a big hit now so maybe the Finns really have something here. My personal taste test result: Meh.

Three other behemoth cruisers were in port today.






We were docked next to a boat storage yard with several boats not launched yet for this season. Hmmm, like at the Harlem YC. You can see  two large marinas behind seawalls across the way
.We could have seen more of Helsinki in our five hours here if we had taken a tour.
Read More..

A BUNCH OF LINKS


Freebie of the week - Sparrowboard1450 PIC18 Development Board. | NUMATO.CC 
Autorino Autopilot on Hydrofoil Boat V1 || Dechsendorfer Weiher - YouTube 
RC hydrofoil - YouTube 
Motors - fastelectrics.net 
Numato Lab (numato) on Pinterest 
New Tab 

DIY RC Receiver (Serial PPM) - AI Matt 
Files - Razor AHRS - Q&U Lab Project Hosting 
Controlling a motor using a wifi connection and a gamepad 
Hydrofoil basics & craft configuration - Boat Design Forums 
GeoGuessr - Lets explore the world! 
Jobs on SEEK - New Zealands no.1 Employment, Career and Recruitment site 
OneTab shared tabs 
Search - Ako Aotearoa 
Track your item - Australia Post 
Selbstgebautes Tragflügelboot / Hydrofoil RC Modellboot - YouTube 
PSK Foiler RC - YouTube 
Edgetracker 426 Open Offshore Power Boat Design - YouTube 
BEST OF RC hydrofoil trimaran - YouTube 
Hysucat Elan 850 trial run 23 Nov 2011 - YouTube 
Arduino Playground - ReadReceiver 
Trailer Parts Online 
www.arkcorp.com.au/Content/manuals/eziguide-Instructions.pdf 
EG11 Eziguide 11 - Boat Trailer Spares 
Multi Roller Conversions & Parts - Conversion Assemblies - Boat Trailer Spares 
? Hysucat 830 elan water flow.MP4 - YouTube 
SF9DOF_AHRS_1_1.zip - sf9domahrs - Razor 9DOF IMU AHRS V1.1 Lite version for AT328/AT168 - AHRS for Sparkfuns "9DOF Razor IMU" - Google Project Hosting 
9 Degrees of Freedom - Razor IMU - AHRS compatible - SparkFun Electronics 
Python 3.3.2 Release 
Arduino 9DOF ArduIMU Controller ATmega328 (ACCEL/MAG/GYRO) 
9 Degrees of Freedom - Razor IMU - AHRS compatible - SparkFun Electronics 
Changes - sf9domahrs - AHRS for Sparkfuns "9DOF Razor IMU" - Google Project Hosting 
itg-3200driver - Arduino driver for the ITG-3200 3 axis MEMS gyroscope by InvenSense - Google Project Hosting 
Sparkfun IMU Razor 9DOF AHRS code - YouTube 
Changes - sf9domahrs - AHRS for Sparkfuns "9DOF Razor IMU" - Google Project Hosting 
Tracking System using 9dof Razor IMU and Servo - Arduino Forum 
Guide to gyro and accelerometer with Arduino including Kalman filtering - Arduino Forum 
Arduino Playground - PIDLibrary 
.net - C# find and extract number from a string - Stack Overflow 
?: Operator (C#) 

diydrones.com - blog

  • What Ning 3.0 Has to Offer! 2 hours 22 min old
  • Weekend Sale: Deep Discount on a 3DR Y6 or X8 with a GoPro Hero 3 Black or $200 Off! 4 hours 8 min old
  • Autumn FPV flying with crash :) 7 hours 28 min old
  • Hobbyking IOS & Android 4CH WiFi Receiver & Win Forms Csharp TX to Arduino RX 14 hours 8 min old
  • Time to shed some positive light on our hobby 19 hours 8 min old
  • Documentary Goes Missing 19 hours 38 min old
  • Drone Discovers Abandoned Renaissance Faire Deep in Virginia Woods 1 day 6 hours old
  • Goggles enable interaction with floating display! 1 day 7 hours old
  • Quadcopter footage of Australian firestorm 1 day 9 hours old
  • PETA selling AR.Drones with a decal as an "Air Angel" 1 day 19 hours old
  • Seed freedom 2 days 4 hours old
  • Coin-sized Retrievor solar-powered GPS tracking device 2 days 6 hours old
  • Micro HD Quadcopter from Hubsan 2 days 19 hours old
  • New DJI IOSD Mini(On Screen Display) & NAZA Firmware V4.0 Testing 3 days 2 hours old
  • Autonomous sail boat part three. Simulation 3 days 3 hours old
  • Skywalker 2013 UAV platform completed 3 days 3 hours old
  • The Next Decade of American Airspace with Chris Anderson 3 days 9 hours old
  • How can DiyDrones surpass RcGroups!? 3 days 10 hours old
  • Robotic Hand Project # 1 4 days 1 hour old
  • How to scare the porridge out of the kids this halloween 4 days 11 hours old
Read More..